LV Energy BS

Helping to light and power our homes and workplaces, Tratos’ Low Voltage (LV) cables are backed by a pedigree of proven experience and manufacturing capability.

Waveform – 3 and 4 core

0.6/1 kV – LSOH Sheath

LV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated, copper wire waveform cables with solid aluminium conductors having low emission of smoke and corrosive gases when affected by fire.

Construction

Conductor – shaped solid aluminium (Class 1) Insulation phase conductors – XLPE Type DIX 3 Assembly of cores – 3 or 4 cores laid up Bedding – extruded or taped synthetic material Concentric conductor – plain annealed copper earth wires applied concentrically with a waveform lay. Oversheath – LSOH Type DMZ 4 Colour – Orange (other colours can be supplied on request) Marking - TRATOS ELECTRIC CABLE 600/1000V BS 7870-3.50 (N x mm²) (AL (W)) (YYYY)

TECHNICAL SPECIFICATIONS

BS 7870-3.50 HD 603 IEC 60502

Ask for more

SNE – Split Concentric

0.6/1 kV – LSOH Sheath

LV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated split concentric cables with copper or aluminium conductors, having low emission of smoke and corrosive gases when affected by fire

Construction

Conductor – stranded plain annealed copper (Class 2 or solid aluminium (Class 1) Insulation phase conductors – XLPE Type DIX 3 Assembly of cores – 3 phase cables cores laid up Bedding – 3 phase cables only – tape Concentric neutral and earth conductor – neutral blue polymeric covered solid copper neutral wires and solid plain annealed copper earth wires Oversheath – LSOH Type DMZ 4 Colour – Orange (other colours can be supplied on request) Marking - TRATOS ELECTRIC CABLE 600/1000V BS 7870-3.22 (N x mm²) (YYYY)

TECHNICAL SPECIFICATIONS

BS 7870-3.22

Ask for more

CNE – Concentric Neutral Earth

0.6/1 kV – LSOH Sheath

LV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors, having low emission of smoke and corrosive gases when affected by fire.

Construction

Conductor – stranded plain annealed copper (Class 2 or solid aluminium (Class 1) Insulation – XLPE Type DIX-3 Assembly of cores – 3 phase cables cores laid up Bedding – 3 phase cables only – tape Concentric neutral/earth conductor – plain annealed copper wires Oversheath – LSOH Type DMZ 4 Colour – Orange (other colours can be supplied on request) Marking - TRATOS ELECTRIC CABLE 600/1000V BS 7870-3.12 (N x mm²) (YYYY)

TECHNICAL SPECIFICATIONS

BS 7870-3.12

Ask for more

Waveform – 3 and 4 core

0.6/1 kV – PVC Sheath

LV polymeric insulated cables for use by distribution and generation utilities Specification for distribution cables of rated voltage 0.6/1 kV XLPE insulated, copper wire waveform cables with solid aluminium conductors. According to BS7870. We can also supply a full range of single core 6491X and 6181Y.

Construction

Conductor – shaped solid aluminium (Class 1) Insulation phase conductors – XLPE Type DIX 3 Assembly of cores – 3 or 4 cores laid up Bedding – extruded synthetic rubber material Concentric conductor – plain annealed copper earth wires applied concentrically with a waveform lay. Oversheath – PVC Type DMV 23 Colour – Black (other colours can be supplied on request) Marking - TRATOS ELECTRIC CABLE 600/1000V BS 7870-3.40 (N x mm²) (AL) (YYYY)

TECHNICAL SPECIFICATIONS

BS 7870-3.40 HD 603 IEC 60502

Ask for more

Multipair – 0.6/1 kV – PVC sheathed

LV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore cables for installation above and below ground. Single wire armoured and PVC sheathed multicore cable with copper conductors, having reduced fire propagation performance. According to BS7870. We can also supply a full range of single core 6491X and 6181Y.

Construction

Conductor – solid plain annealed copper (Class 1) Insulation – Polyethylene Type TI Y Assembly of cores – 2 cores twisted to form a pair, pairs laid up in concentric layers, filled or unfilled with a suitable compound as specified by the customer Bedding – Polyethylene Type TM Y Armouring – Single helical layer of galvanised steel or aluminium wires Oversheath – PVC Type TM1 Black Colour – Black (other colours can be supplied on request) Marking - TRATOS ELECTRIC CABLE TELE (unfilled) or TELE F (filled) BS 7870-8.2 (Year of Manufacture)

TECHNICAL SPECIFICATIONS

BS 7870-8.2 HD 627 ENA TS 09-6

Ask for more

Multicore – 0.6/1 kV – PVC sheath

LV polymeric insulated cables for use by distribution and generation utilities Specification for multipair cables for installation above and below ground. Single wire armoured and PVC sheathed multipair cable with copper conductors, having reduced fire propagation performance. According to BS7870. We can also supply a full range of single core 6491X and 6181Y.

Construction

Conductor – stranded plain annealed copper (Class 2) Insulation – XLPE, HEPR or PVC Assembly of cores – cores laid up in concentric layers Bedding – extruded polymer compound Armouring – Single helical layer of galvanised steel wires Oversheath – PVC Type TM1 Colour – Black (other colours can be supplied on request) Marking - TRATOS ELECTRIC CABLE BS 7870-8.3 (N x mm²) (Year of Manufacture)

TECHNICAL SPECIFICATIONS

BS 7870-8.3 ENA TS 09-6

Ask for more

SNE - Split Concentric

0.6/1 kV – PVC Sheath

LV polymeric insulated cables for use by distribution and generation utilities Specification for distribution cables of rated voltage 0.6/1 kV XLPE insulated split concentric cables with copper or aluminium conductors. According to BS7870. We can also supply a full range of single core 6491X and 6181Y.

Construction

Conductor – stranded plain annealed copper (Class 2 or solid aluminium (Class 1) Insulation phase conductors – XLPE Type DIX 3 Assembly of cores – 3 phase cables cores laid up Bedding – 3 phase cables only – tape Concentric neutral and earth conductor – blue polymeric covered neutral wires and plain annealed copper earth wires Oversheath – PVC Type DMV 23 Colour – Black (other colours can be supplied on request) Marking - TRATOS ELECTRIC CABLE 600/1000V BS 7870-3.21 (N x mm²) (YYYY)

TECHNICAL SPECIFICATIONS

BS 7870-2.21

Ask for more

CNE – Concentric Neutral Earth

0.6/1 kV - PVC sheath

LV polymeric insulated cables for use by distribution and generation utilities Specification for distribution cables of rated voltage 0.6/1 kV XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors. PVC Sheathed. According to BS7870. We can also supply a full range of single core 6491X and 6181Y.

Construction

Conductor – stranded plain annealed copper (Class 2 or solid aluminium (Class 1) Insulation – XLPE Type DIX 3 Assembly of cores – 3 phase cables cores laid up Bedding – 3 phase cables only – tape Concentric neutral/earth conductor – plain annealed copper wires Oversheath – PVC Type DMV 23 Colour – Black (other colours can be supplied on request) Marking - TRATOS ELECTRIC CABLE 600/1000V BS 7870-3.11 (Number of Cores and Size) (Year of Manufacture)